Do you want to wipe erase hard drive data in a computer that you are selling or giving away ?..
Got a pile of old drives that you need to wipe / erase hard drive data permanently (known as "Data Earsure") before sending them to Silicon Heaven? Or do you want to wipe a drive in a computer that you are selling or giving away? Here are some tips and tricks to help you get the job done.
What Is Data Erasure ?
Since hard drives (HDDs) and solid-state drives (SSDs) need different handling for data erasure, I'm going to cover them separately here.
How To Permanently Erase Wipe Hard Drives HDDs or Solid State Drives SSDs
There are three approaches you can take to securely erase hard drive data.
The cheapest way to tackle a pile of hard drives is to erase hard drive data with a software eraser. I will warn you though: it's not quick, and it won't work on defective disks.
My tool of choice for wiping drives is Darik's Boot And Nuke . It's free and does an excellent job of wiping drives clean.
To use it, you'll need to create a wipe CD or DVD, then hook up the drives you want to erase hard drive data to a PC, and run the software. Be careful not to inadvertently wipe a drive containing data you need because that will make your life suck. I suggest using a spare PC or, failing that, disconnecting all the data drives from the system you use, just in case. You can do this since you'll be booting up off the Boot And Nuke disc and not the internal drive.
I recommend that you read and thoroughly familiarize yourself with the documentation for this software because if you take your eye off the ball and erase hard drive data on the wrong drive, your data is gone.
If you don't feel like taking the software approach, another method you can take is to employ a bespoke hardware tool to do the job. At this point, though, things start to get a little expensive, but it is faster and does mean that you don't have to dedicate a PC to the erase hard drive data operation.
The tool I use is Wiebetech's Drive eRazer Ultra.
It's a fast, reliable, standalone solution to erase hard drive data and deleting everything. You hook up the drive to it, tap a few buttons, and Drive eRazer Ultra takes care of the rest.
- Secure, standalone drive erasing for up to four 2.5-inch and 3.5-inch SATA SSD/HDD drives
- Nine erase modes including: Quick and Secure Erase, Single Pass Overwrite, and Multi-pass Overwrites -- meets DoD (5220.22-M) standards
- Support for Secure Erase and Enhanced Secure Erase for SSDs
- Easy operation with LCD and push-button navigation
- The built-in nine-pin serial port enables you to print erase logs using a receipt printer
- Supports SATA I and II (up to 3Gbps)
- Also supports 2.5-inch and 3.5-inch IDE hard drives, mSATA drives, and SATA M.2 drives using a compatible StarTech.com adapter
- TAA compliant
- Plug-and-play installation
I've used this tool to erase hard drive data dozens of drives with great success. It's an expensive solution for sure -- the eRazer Ultra starts at $250 -- but if you have a lot of drives to wipe, it's well worth it.
If you have a lot of drives to erase hard drive data, then you might want to go for a tool that can erase multiple drives simultaneously, such as the StarTech four-bay drive eraser .
Out of the box, the four-bay unit is capable of dealing with 2.5-inch and 3.5-inch SATA drives (both SSDs and HDDs) and the hard drive eraser also works with 2.5-inch and 3.5-inch IDE hard drives, mSATA drives, and SATA M.2 drives using a compatible StarTech.com adapter.
- 4 drive bays
- Push-button operation
- Easy to use thanks to its convenient menu navigation system
- Built-in LCD that clearly identifies the erase modes and task status
- connect the eraser to a computer to quickly access the drive that's attached to port-1 on the eraser
- Ensure your records are complete for auditing, the hard drive eraser features a nine-pin serial port that can connect to a serial printer to provide on-demand erase logs.
The hands-on methods
OK, what do you do if you want to wipe drives that have died or become defective in some way with data still on them that now cannot be wiped? You could take a chance that since the drive is dead, the data is gone, but you got to plan on the drive falling into the hands of someone cleverer than you (or someone who has more time, patience, and resources).
Here's where the hands-on methods come into play. These methods also work great if you just want to destroy drives before you take them to the recycling plant.
I have two methods. A surgical method, and a more medieval method.
For the surgical method you will need:
- A drill and HSS drill bit (I use about 1/4-inch/6mm) -- you see where I'm going with this
- Thick gloves -- shards of metal will shred you
- Eye protection -- we're destroying drives here, not eyes
- A vice or clamp -- stops the drill bit from getting caught in the drive and turning it into a wildly spinning and flailing object
I then go about drilling three holes as shown below. If you want speed and only want to drill a single hole, pick the spot with the X. For a more complete job, hit the green stars, too. See the video above for a step-be-step guide.
You can also optionally put a couple of holes in the circuit board on the other side for good measure.
Then there more brutal method. For this, you will need:
- A hammer -- I use my trusty 32oz "fine adjustment" hammer
- A thick nail -- a 6-inch nail will do fine
- Thick gloves -- because you're going to be hammering that nail through the drive using the hammer, and hammers seem to be inexplicably attracted to thumbs
- A block of wood -- so you don't nail the drive to your floor (it's preferable to do this outside if you can)
- Eye protection -- you've only got a maximum of two to start with, so it's silly to take chances!
Now, you apply brute force. Ideally, you want to put a nail through the platters of the drive, going all the way through (it's actually not as hard as it sounds). Again, aim for the spot marked by the red X, and optionally the green stars for a more complete job.
This is a very effective method of destroying drives, and it's also a lot of fun, not to mention a great way to relieve stress!
With solid-state drives, things can get very complicated, and I could write reams about TRIM commands and garbage collection, and so on. The problem is things get convoluted, which is when mistakes happen and your precious baby pictures or work project gets deleted. With that in mind, I'm going to keep things simple.
Erase using manufacturer utilities
One way to erase SSDs is to use the manufacturer's utilities. Here are some links to get you started.
- Intel Solid-State Toolbox
- Corsair SSD Toolbox
- SanDisk SSD Toolbox
- Samsung Magician Software
- OCZ Toolbox
If you have a drive from a different source, go check out their website.
Encrypt the whole drive
One of the easiest ways is to encrypt the entire drive with a complex passphrase. On Windows, you can use something like VeraCrypt . On Mac, you can use the built-in FileVault utility, and you're done. No passphrase, no data.
You can then format the drive, from which point it should be sterile and ready to accept a reload of the data.
Another way to do this is to use a software tool called PARTED Magic . This supports both HDDs and SSDs.
While PARTED Magic is not free (price starts at a reasonable $11), it is a very effective tool, and one of the best I've used for wiping SSDs.
The hands-on method
If the drive is dead, or you just want to get rid of it in a hurry and don't want a functioning drive at the end of it, then you can take a hammer to the SSD or flash drive.
One thing to bear in mind is that the data in SSDs is held on small flash storage chips rather than large platters, and to securely erase the data, you need to smash the chips. Usually this means taking the cover off the drive before you start swinging.
If you're not sure which are the flash storage chips, just drive a nail through all the large chips to be on the safe side.